Как следует регулярно очищать классификатор воздушного потока?

For the cleansing operation of the airflow classifier, the subsequent steps may be followed:
1. Shutdown preparation
Turn off the power, reduce off all strength supply,
Empty the fabric withinside the silo to make certain that there's no dirt accumulation in the device
2. Disassemble and easy
Dismantle removable additives, including grading chambers, discharge pipes, etc
Carefully easy the indoors of the device with compressed air or a vacuum cleanser to do away with all dirt.
Wipe the floor and internal partitions of the tool with a smooth fabric to do away with any connected impurities
3. Inspection and renovation
Check the wear and tear of every thing and update broken elements in a well timed manner,
Check if the fan is going for walks nicely and make certain clean airflow.
Check if the manipulate device is operating nicely.
4. Reinstall
Reinstall the disassembled additives in region to make certain right installation.
Check the sealing of every thing to make certain no leakage.
Power at the tool and test if it's miles going for walks nicely,
5. Test Run
·Use a small quantity of uncooked substances for trial operation to test the grading impact.
·Adjust parameters including airflow velocity primarily based totally at the grading impact to optimize grading performance,
6. Record keeping
Record the cleansing time, content, and results, and set up a renovation ledger.
Develop a ordinary cleansing plan to make certain long-time period strong operation of the device